Skip to main content
Delacco
+385 91 25 50 100 sales@delacco.com
Quote request Contact EN EN
Final testing phase: this online store is being tested. Quotations and orders generated during this period are provisional — our team will personally confirm each one by email before anything becomes binding.
Back to catalog

Manual Drum Stackers

Manual drum lifter and drum tilting stackers for safe handling of 200 l steel drums — lifting, transporting and controlled tilting up to 400 kg without a power supply.
4 products
Drum Trolley (KZB300) 300 kg −20% −55 EUR Simple product: one standard version — ready to order as shown.

Drum Trolley (KZB300) 300 kg

SKU: KZB300 Made to order · 16–20 weeks
220,00 EUR
Simple product

How to choose

What it is for

  1. Lifting, moving and tipping 200 l drums by hand.
  2. Chemical and food handling, workshops.

Check before you choose

  • Drum type (steel/plastic) and weight
  • Lift height and tipping needed?
  • Clamp type

Not suitable for

  • Pallets

What we will ask you before recommending a model

Drum stacker / lifter Technical check — we confirm a few parameters and compatibility with you before the order.
  1. Drum type: steel/plastic/fibre; volume, diameter, height, rim geometry; mass full/empty; lift height; lift only or also tilt/pour (angle)? The standard gripper is not automatically compatible with plastic or non-standard drums — confirm rim/body geometry.

Typical mistakes to avoid

  • Standard gripper may not fit plastic or non-standard drums — confirm the rim/body geometry.

Helpful to have ready: Photo and drawing of the drum · Diameter/height · Mass · Required height and angle

Drum trolley Standard selection — the parameters above are enough to choose the right model.
  1. Mass, volume/diameter, drum material, gripping method, transport distance, floor, thresholds? Capacity alone is not enough — the grip must match diameter and rim.

Typical mistakes to avoid

  • Grip must match the drum diameter and rim, not just capacity.

Helpful to have ready: Drum type · Diameter · Mass · Route and floor

Manual drum stackers

A 200-litre steel drum is an awkward 400 kg: these manual stackers lift, transport and tilt it in controlled fashion without any power supply. The RVB40A lifts drums up to 572 mm diameter to 1350 mm and tilts them up to 120° for controlled pouring; the RVB40B adds a gripping mechanism that locks the drum vertically or horizontally.

For palletised (non-drum) loads see manual pallet stackers. Contact us with your drum type and pouring height and we will confirm the model.

Frequently asked questions

Which drums do these stackers handle?

Standard 200 l steel drums up to 572 mm in diameter and 400 kg gross weight. For plastic or non-standard drums, send us the dimensions and we will check the gripping mechanism's fit.

RVB40A or RVB40B?

The RVB40A is the pouring specialist — tilting up to 120° for controlled emptying into mixers and machines. The RVB40B grips and locks the drum vertically or horizontally, which suits repositioning and storage as much as pouring.

How quickly can a drum stacker be delivered?

Request a quote on the product page and we will confirm availability, the current lead time and the delivery cost for your location.