Single Scissor Lift Table 2000 kg
From 1.264,00 EUR
Back to catalog
Single Scissor Lift Table 1000 kg
Price
From 1.480,00 EUR
From 1.332,00 EUR
Up to −20%
Save up to 534 EUR
Direct factory order
— −20% · 16–20 weeks · 40% deposit
Direct factory order — save 20%
Produced to order at the manufacturer’s plant and shipped directly — the factory discount is already included in the price shown.
- Production & delivery: 16–20 weeks
- Deposit at order: 40%
- Balance: 60% before dispatch or collection
Some variants are in stock and ship immediately — look for the green buttons in the variant grid. In-stock pieces carry their own stock discount; the full factory discount applies to made-to-order units.
Factory-order prices are outside the automatic volume and bundle discount programme. Because production and sea freight are scheduled months ahead, we reserve the right to adjust the balance in the event of significant exchange-rate or container-freight cost changes before dispatch — we will always contact you first. B2B sales only.
Available variants
In stock — ships now
Factory order — made to order
Available — ships in 7–10 working days
Shipping estimate
This product
—
Weight
—
Packaging
—
Your cart
—
Select your delivery country for an instant freight estimate.
Categories:
Low-Lift Hydraulic Tables
Need a tailored offer?
Send us your requirements through the quote form — this product will be prefilled and you can add more items in one request.
Industrial single scissor hydraulic lift table rated at 1000 kg, built for intensive duty with platform sizes from 1300x820 mm to 2000x850 mm.
Key features
- Industrial lift tables designed for intensive use
- Series complies with EN 1570:1 and ANSI/ASME safety standards
- Can be installed above ground or recessed into a floor pit
- Aluminium safety contacts on the lower platform edge prevent injuries during lowering
- 24 V control box
- Internal power pack with overload relief valve and compensated valve for regulated lowering speed
- Cylinder-integrated drain system with a check valve that stops lowering in case of hose failure
- Automatic lubrication of the lifting points
- Eye bolts make installation easier
- AC motor drive
- Lift tables can also be manufactured to customer-specific requirements
Technical overview
- Model / SKU: JHS1000
- Product family: Low-Lift Hydraulic Tables
- Load capacity: 1000 kg
- Platform length: 1300 mm, 1600 mm, 1700 mm, 2000 mm
- Platform width: 1000 mm, 1500 mm, 1700 mm, 820 mm, 850 mm
- Lowered height: 205 mm, 240 mm
- Raised height: 1300 mm, 990 mm
Order online or send a quote request for delivery terms and customer-specific configurations.
What it is for
- Stationary scissor table raising loads to ~1–1.6 m — pallet loading/unloading, assembly.
- Production line feeding.
This model
Single scissor: lift ≈ 1–1.6 m. Capacity options: 1000 kg. Lift heights: 1300 mm, 990 mm. Platform width: 1000 mm, 1500 mm, 1700 mm, 820 mm, 850 mm. Platform length: 1300 mm, 1600 mm, 1700 mm, 2000 mm. Lowered height: 205 mm, 240 mm.
Check before you choose
- Capacity 1–8 t
- Platform size vs. pallet
- Lowered height (pit or ramp needed?)
- Power and control
Not suitable for
- Heights above 1.6 m — double/triple scissor
Before you order Technical check — we confirm a few parameters and compatibility with you before the order.
To confirm the right configuration we will ask you:
- Load mass, dimensions and how it is placed: centred, at an edge, rolled on, point load? Does a pallet truck or forklift drive onto the platform? Rated capacity does not permit any point or eccentric load; edge/rolling loads count as 50 % / 33 %; a vehicle on the platform adds wheel loads.
- Platform size vs. load footprint; lowered and raised height; travel; cycles per hour; lifting time? Lowered height decides pit or ramp; travel decides single/double/triple scissor; cycle rate sizes motor and hydraulics.
Typical mistakes to avoid
- Nominal capacity does not allow arbitrary point or eccentric loading — check the permitted distribution.
Helpful to have ready: Mass/dimensions/COG · Heights · Cycles · Power · Drawing of pit/space · Loading method
Attributes
| Platform length | 1300 mm, 1600 mm, 1700 mm, 2000 mm |
|---|---|
| Platform width | 820 mm, 850 mm, 1000 mm, 1500 mm, 1700 mm |
| Lowered height | 205 mm, 240 mm |
| Raised height | 990 mm, 1300 mm |
| Load capacity | 1000 kg |
Related products
Single Scissor Lift Table 4000 kg
From 1.488,00 EUR
Single Scissor Lift Table 6000 kg
From 2.936,00 EUR
Double Horizontal Scissor Lift Table 2000-8000 kg
From 2.552,00 EUR