Back to catalog
Stainless Steel Hand Pallet Truck (RPV2500NC) 2500 kg
Price
On request
Direct factory order
— 16–20 weeks · 50% deposit
Direct factory order
Produced to order at the manufacturer’s plant and shipped directly — the factory discount is already included in the price shown.
- Production & delivery: 16–20 weeks
- Deposit at order: 50%
- Balance: 50% before dispatch or collection
Factory-order prices are outside the automatic volume and bundle discount programme. Because production and sea freight are scheduled months ahead, we reserve the right to adjust the balance in the event of significant exchange-rate or container-freight cost changes before dispatch — we will always contact you first. B2B sales only.
Direct factory order (made to order)
Group order
1 of 6 units secured — 5 more to confirm the group
Be the first to order and get an extra −2% — already included in the price at checkout. Your booked deposit starts the countdown for the rest of the group.
A 50% deposit secures your units. If the group is not completed in time, your deposit is refunded in full within 5 working days. Group order terms
Shipping estimate
This product
—
Weight
—
Packaging
—
Your cart
—
Select your delivery country for an instant freight estimate.
Categories:
Hand Pallet Trucks
Need a tailored offer?
Send us your requirements through the quote form — this product will be prefilled and you can add more items in one request.
Painted steel does not last long where floors are hosed down, surfaces are disinfected and the air is salty or freezing. This truck is built from stainless steel, so it tolerates cleaning agents, brine and condensation, and its smooth surfaces can be wiped down between shifts without leaving rust behind.
Corrosion resistance where it counts
- Stainless frame, forks and tiller — no paint to chip and no bare steel to rust
- Suitable for regular washdown and disinfection regimes
- Works in chilled and frozen rooms and in the traffic in and out of them, where condensation attacks ordinary trucks
- Full 2500 kg capacity on the standard chassis geometry
Typical industries
- Meat, poultry and fish processing, and further processing
- Dairies, bakeries, wineries, breweries and beverage bottling
- Pharmaceutical and chemical production, and laboratories
- Cold stores, freezer warehouses and distribution of chilled goods
Dimensions
Forks are 45 mm thick, 160 mm wide and 1150 or 1220 mm long, running on ø74x93 mm single or ø74x70 mm tandem rollers. Lowered fork height is 85 mm with ø200 mm steering wheels or 75 mm with ø180 mm wheels, lift is 200 or 190 mm, and service weight is 76-88 kg.
Order online or send a quote request for delivery terms and customer-specific configurations.
What it is for
- Moving pallets short distances at floor level by hand — loading bays, shops, workshops.
- Occasional use, vehicle unloading, tight spaces.
- Special variants: stainless (food), galvanized (wet/outdoor), scale, low-profile, long/short forks, rough terrain.
This model
Stainless steel: food, pharma, chemical and washdown areas. Capacity options: 2500 kg.
Check before you choose
- Capacity (2 000–5 000 kg) with reserve
- Fork length/width vs. pallet (EUR 1200×800: standard 1150 mm forks; long forks for 2 pallets or long goods)
- Lowered fork height for low pallets
- Wheels: nylon (hard floor), polyurethane (quiet, delicate floors), rubber
- Environment: food/pharma → stainless; wet → galvanized
Not suitable for
- Lifting pallets onto racking or vehicles (max ~200 mm lift) — use a stacker
- Long distances or multi-shift — electric pallet truck
- Gradients/ramps with heavy loads
Before you order Standard selection — the parameters above are enough to choose the right model.
To confirm the right configuration we will ask you:
- Heaviest load including pallet, packaging and any attachment? Rule of thumb: use at most 80 % of rated capacity for safety and service life.
- Pallet type/dimensions (EUR 1200×800, industrial 1200×1000, half, display, custom)? Closed-bottom or low pallets? Entry height? Pallet compatibility matters more than capacity: fork length, overall width, lowered height and pallet underside.
- What is the floor: industrial concrete, asphalt, paving, gravel, uneven, potholes, sharp edges, expansion joints, thresholds, drains? Small polyurethane wheels and no suspension: tolerance for unevenness is very low. Sharp edges cut the PU tread; gaps stop the small load rollers.
- Distance per trip, trips per day, ramps? A hand truck is for short level moves; pushing 2 t up a ramp is unsafe.
Typical mistakes to avoid
- Pallet compatibility is more important than capacity — check entry height and pallet underside.
Helpful to have ready: Photo/dimensions of the pallet · Max mass · Transport distance · Floor · Special version
Attributes
| Load capacity | 2500 kg |
|---|---|
| Material | Stainless steel frame, forks and tiller |
| Lowered fork height | 85 mm, 75 mm |
| Lift height | 200 mm, 190 mm |
| Height, mast lowered | 1224 mm, 1214 mm |
| Fork length | 1150 mm, 1220 mm |
| Width overall forks | 520 mm, 550 mm, 685 mm |
| Overall length | 1533 mm, 1603 mm |
| Steering wheels | ø200 mm, ø180 mm |
| Fork dimensions | 45/160/1150 mm, 45/160/1220 mm |
| Fork rollers, single | ø74x93 mm |
| Fork rollers, tandem | ø74x70 mm |
| Ground clearance, centre of wheelbase (m2) | 40 mm, 30 mm |
| Aisle width for pallets 1000x1200mm | 1733 mm, 1803 mm |
| Aisle width for pallets 800x1200mm | 1783 mm, 1803 mm |
| Turning radius | 1266 mm, 1336 mm |
| Service weight | 76-88 kg |
Related products
Stainless Steel Hand Pallet Truck (RPV2500NC) 2500 kg
On request