Skip to main content
Delacco
+385 91 25 50 100 sales@delacco.com
Quote request Contact EN EN
Final testing phase: this online store is being tested. Quotations and orders generated during this period are provisional — our team will personally confirm each one by email before anything becomes binding.
Back to catalog

Chain Slings

Grade 80 and grade 100 chain slings in 1- to 4-leg configurations, with shortening hooks and certified components for heavy lifting.
4 products

How to choose

What it is for

  1. Grade 80/100 chain slings for heavy, hot or sharp-edged loads.
  2. Steel fabrication, foundry, construction.

Check before you choose

  • Grade and WLL per configuration
  • Number of legs and reach
  • Shortening hooks needed?
  • Temperature range

Not suitable for

  • Delicate surfaces — use textile

What we will ask you before recommending a model

Chain sling G80/G100 (1–4 legs) Technical check — we confirm a few parameters and compatibility with you before the order.
  1. Mass, number of legs, effective length, angle, COG, number/position of pick-points, master link, bottom hooks, shorteners, temperature? WLL changes with angle and distribution; an asymmetric load can overload one leg; the master link must fit the crane hook.

Typical mistakes to avoid

  • WLL changes with angle and distribution; asymmetric loads overload one leg; the master link must fit the hook.

Helpful to have ready: Mass/COG · Number/spacing of points · Length · Angle · Photo of hook and load

Chain slings

Where textile slings fail — sharp edges, heat, abrasion, rough handling — chain slings work for decades: graded chain and components, assembled to your length and configuration, with shortening hooks to adjust legs on the job. The G80 LOK programme covers single-leg (1120–12 500 kg), two-leg (up to 17 000 kg) and three- and four-leg configurations (up to 26 500 kg).

For loads with sensitive surfaces, polyester slings are the gentler choice, and spreader beams keep multi-point lifts under control. Lashing is a separate, non-interchangeable product family — see lashing chains. Contact us with the load and pick-up geometry and we will assemble the right sling.

Frequently asked questions

How does the leg angle affect capacity?

The stated multi-leg capacities apply within the rated angle range — as the legs spread wider, each carries more force and the sling's capacity drops. Rate the lift by the angle actually achieved, from the table on the sling's tag.

What are the shortening hooks for?

They let each leg be shortened link by link, so an asymmetric load can hang level from a standard sling — no separate short slings needed for every load geometry.

How often must chain slings be inspected?

Visually before each use and periodically by a competent person per regulations; wear, elongation and deformation limits are defined per component. Damaged components are replaced by certified parts — one advantage of assembled slings.

How quickly can a chain sling be delivered?

Slings are assembled to your specification (legs, length, components). Request a quote and we will confirm the current lead time and delivery cost for your location.