Name: Articulated pillar jib crane with self-supporting hubs 1000kg span 2m height 3m
SKU: ZSD-S1000-S2-H3
Price: 6950.00 EUR
Availability: BackOrder

Description

Articulated pillar jib crane with self-supporting hubs 1000kg – Basic specifications:

load capacity 50kg, 80kg, 125kg, 250kg, 500kg, 1000kg
span 2m, 2,5m, 3m, 3,5m, 4m, 4,5m, 5m
height under beam 2.5m, 3m, 3.5m, 4m

Articulated pillar jib crane with self-supporting hubs 1000kg – Description and options:

standard height of the crane arm 3m, up to 4m at the request of the customer (for higher heights, please contact us)
the construction of this pillar jib crane consists of a hollow column, intended for a closed working environment
crane rotation: 350° first arm and 300° second arm
this type of hoist cannot have motorized rotation, but a chain hoist can be electric
the design deflection of the structure under the nominal load is (height span)/250, with a maximum deflection less than one hundredth of the span (distance of the center of gravity of the load from the column)
protective polyester paint (RAL1028) in powder 60 microns on the sanded surface (for indoor use – equivalent C2)
maximum lifting speed 16m/min
delivery: the disassembled structure is packed in a protective film for transport by truck

Options:

wide base plate with chemical anchors
template with anchor rods
concrete base
steel base
manual or electric chain hoist (single-speed and two-speed with inverter)
cable in tube
lockable main switch
hot dip galvanizing (delivery time 2 weeks)
possibility of choosing another color, range from RAL1001 to RAL9018
polyester powder painting on epoxy primer 120 microns for outdoor use (equivalent C3)

The crane is manufactured exclusively to order.

Shipping Info

We organize delivery for all EU countries.

The current shipping price depends on several factors. The key factors are the dimensions and weight of the cargo, the route (place of loading/destination), the total distance, the delivery zone (urban areas, remote places, islands…) and the current price of fuel. In order to enable the fastest, most reliable and favorable transport of goods, we use the TIMOCOM Marketplace.
The prices shown below are indicative and non-binding. A separate transportation request is made for each order.

When choosing a carrier, all important criteria such as reliability, safety and availability are systematically checked, so that the most favorable price is not taken as a key factor.

For larger orders, the transport price should be more favorable than indicated in the table.
For the calculation, it is necessary to sum the values of W, H, Wt and D. The values of W, H, Wt and D vary depending on the length (L) of the load.

For all islands that are not connected to the mainland by road, +55% should be added to the displayed price.

The cost of transportation is charged just before delivery.