Underbraced pillar jib crane 150kg – Basic specifications:
- load capacity 150kg, 250kg, 500kg, 1000kg (1t), 1600kg, 2000kg (2t)
- span 2m, 2.5m, 3m, 3.5m, 4m, 4.5m, 5m, 5.5m, 6m, 6.5m, 7m
- height under beam 2.5m, 3m, 3.5m, 4m, 4.5m, 5m, 5.5m, 6m, 6.5m, 7m, 7.5m, 8m, 8.5m, 9m, 9.5m, 10m, 10.5m, 11m
Underbraced pillar jib crane 150kg – Description and options:
- standard height of the crane arm 3m, up to 4m at the request of the customer (for higher heights, please contact us)
- the construction underbraced pillar jib crane consists of a low profile column, intended for a closed working environment, crane rotation: 270°, the crane arm is made of a hollow U profile
- turning the jib crane arm and setting the spring regulation is manual, this model of jib crane cannot be motorized
- the design deflection of the structure under the nominal load is (height span)/250, with the maximum deflection less than a hundredth of the span (distance of the center of gravity of the load from the pillar)
- protection: 60 micron polyester powder coating on sanded surface, yellow color RAL1028
- the maximum lifting speed is 16m/min
- polyester powder painting 60 microns with specific color for indoor use (equivalent C2)
- delivery: the disassembled structure is packed in a protective film for transport by truck
Options:
- wide base plate with chemical anchors
- template with anchor rods
- manual or motorized beam trolley
- manual or electric chain hoist (single-speed and two-speed with inverter)
- feeding line (cable holders)
- power cable
- lockable main switch
- rotation slowing device
- adjustable end stops
- rotation lock 1 position
- rotation lock multi-positions
- hot dip galvanizing (delivery time 2 weeks)
- possibility of choosing another color, range from RAL1001 to RAL9018
- polyester powder painting on epoxy primer 120 microns for outdoor use (equivalent C3)
The crane is manufactured exclusively to order.
